Author Topic: link to Goose call tuning write up (Read 1607 times)

dwk5150 · « **on:** February 17, 2009, 08:51:36 AM »

I stumbled across this write up on Tuning A Short Reed Goose Call. Hopefully its ok that I link this but it seems informative and hopefully will help some people.

http://gamehogghuntclub.com/Techniques/Tuning%20A%20Short%20Reed.html

knightmare831 · « **Reply #1 on:** February 17, 2009, 11:12:56 AM »

That is very informative. Thank you for posting that here.

Braz · « **Reply #2 on:** February 17, 2009, 05:22:29 PM »

Good article, thanks. I made this a sticky so we can easily find it again.

Steve S · « **Reply #3 on:** February 18, 2009, 02:49:06 PM »

Now if I could just find one for goose flutes

Steve

swmohunter · « **Reply #4 on:** February 26, 2009, 11:24:21 PM »

Nice, thanks for the link!

Parker · « **Reply #5 on:** February 27, 2009, 09:21:35 AM »

Looks like I'm going to have to do some reading later.

I wonder where a person could come across one of those tools, and how much they would cost?

Parker

knightmare831 · « **Reply #6 on:** February 27, 2009, 10:38:46 AM »

Here ya go parker, looks like he used a clamp like the one in this kit and then drilled it to a piece of stock that he turned round. I'm gonna have to make me one of these.

http://www.rockler.com/product.cfm?page=1578&filter=hold%20down

Heres some I found at Woodcraft.com

http://www.woodcraft.com/family.aspx?familyid=4419

Parker · « **Reply #7 on:** February 27, 2009, 12:07:32 PM »

Sweet! I like the variety Woodcraft has. Surely a 100 pound clamp would be more than enough, right?

Parker

knightmare831 · « **Reply #8 on:** February 27, 2009, 12:32:24 PM »

lol, depends on how hard you plan on shaving a reed and how tough the reed is, lmao.

News: